Cisco Systems 611 manual LED Indicators, Front Panel LEDs

Chapter 1 Introducing the Cisco Wide Area Application Engine

Hardware Features

1

3

CD eject button 2 Power control button

Reset button

Table 1-1	Front Panel Control Buttons
Item		Description
CD eject button		Releases a CD from the drive.
Power control button		Powers up the device.
Reset button		Resets the device and runs the power-on self-test (POST). You might need
		to use a pen or the end of a straightened paper clip to press the button.
		Note This is a hardware reset button and does not restore the device to the
		factory default software settings.

LED Indicators

Figure 1-6shows the location of front panel LEDs, and Table 1-2describes their function.

Figure 1-6 Front Panel LEDs

				3
	1		2	4	5
					115772
1	CD-ROM drive activity	2	System error
3	System locator (not supported on	4	Hard disk drive activity
	Content Engine models)
5	Power
	Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
	OL-7220-02				1-7