Cisco Systems 611 manual Ports and LED Indicators, LEDs State Description

Chapter 1 Introducing the Cisco Wide Area Application Engine

Hardware Features

becoming a single point of failure and allows traffic to continue to flow between the router and the client while it passes through an unresponsive WAE without being processed.

For more information about configuring the inline network adapter, see the Cisco Wide Area Application Services Configuration Guide.

Ports and LED Indicators

Figure 1-16shows the inline network adapter port numbers, interface designations, and LEDs. Table 1-8describes the LED functions.

Figure 1-16 Inline Network Adapter Port Numbering and LEDs

							0		1	2	3
											LINK/ACT
											100	BYPASS
											1000
			0	1		2	3
0	Port 0; Group 1 WAN interface						1	Port 1; Group 1 LAN interface
2	Port 2; Group 0 WAN interface						3	Port 3: Group 0 LAN interface
				The inline network adapter has three LEDs that correspond to each port (the 0
				LEDs correspond to Port 0, and so forth). Table 1-8describes the LEDs.
Table 1-8			Inline Network Adapter LEDs
LEDs					State	Description
Link / Activity					On	The 10/100/1000BASE-T interface is receiving power.
					Blinking	The Ethernet link is transmitting data.
100					On	The speed of the Ethernet connection is 100BASE-TX.
		Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
1-18											OL-7220-02