Cisco Systems 611 manual Installing the Cisco Wide Area Application Engine, Vii

4-17

4-15

3-12

3-3

3-4

Contents

Rack Installation Safety Guidelines 2-6

Installing the Cisco Wide Area Application Engine 3-1

Tools and Parts Required 3-2

Installing the Cisco Wide Area Application Engine 3-2

Installing the Chassis in a Two-Post Rack

Installing the Chassis in a Four-Post Rack

Installing the Chassis on a Tabletop

Connecting Cables	3-13
Connecting Power and Booting the System 3-14
Checking the LEDs	3-15
Removing or Replacing a Cisco Wide Area Application Engine 3-15
Installing Hardware Options 4-1
Removing the Cover and Bezel		4-1
Installing Adapters	4-3
Installing an MPEG Decoder Adapter			4-5
Installing a Fibre Channel Adapter 4-8
Preparing to Install the Adapter			4-9
Installing the Fibre Channel Adapter 4-10
Troubleshooting the Fibre Channel Adapter Installation 4-10
Installing DIMMs	4-12
Working with Hard Disk Drives		4-15

Installing a Hard Disk Drive in the WAE-511

Completing the Installation

Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide

OL-7220-02 vii