Cisco Systems 611 manual Installing the Chassis in a Two-Post Rack, Orientation for 19-inch rack

Chapter 3 Installing the Cisco Wide Area Application Engine

Installing the Cisco Wide Area Application Engine

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

•This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

•When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

•If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006

Installing the Chassis in a Two-Post Rack

The chassis mounts to two rack posts with brackets that attach to the sides of the chassis. These brackets are for a 19-inch (48.26-cm) equipment rack and require four screws in each bracket. (See Figure 3-1.)

Figure 3-1 Rack-Mount Brackets

Orientation for 19-inch rack

124554

	Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02		3-3