4-33
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
Chapter4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Ethernet Configuration Menu
The Ethernet Configuration menu includes the options described in Table 4- 14.
Security Configuration Menu
The Security Configuration menu that you access from the Device
Configuration menu displays settings that relate to security for phone.
Table 4 -15 describes the options on the Security Configuration menu.
Note The phone also has a Security Configuration menu that you access directly from
the Settings menu. For information about the security options on that menu, see
the see the “Security Configuration Menu” section on page4-37.
Table4-14 Ethernet Configuration Menu Options
Option Description To Change
Span to PC Port Indicates whether the phone will
forward packets transmitted and
received on the network port to the
access port.
Enable this option if an application that
requires monitoring of the phone’s
traffic is being run on the access port.
These applications include monitoring
and recording applications (common in
call center environments) and network
packet capture tools that are used for
diagnostic purposes.
Use Cisco Unified CallManager
Administration > Device > Phone >
Phone Configuration.