4-7
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
Chapter4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Related Topics
•Displaying a Configuration Menu, page4-3
•Unlocking and Locking Options, page4-4
•Editing Values, page4-5
•Network Configuration Menu, page 4-7
•Device Configuration Menu, page4-15
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a
variety of network settings. Table 4- 2 describes these options and, where
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
“Displaying a Configuration Menu” section on page4-3.
Before you can change an option on this menu, you must unlock options as
described in the “Unlocking and Locking Options” section on page 4-4. The Edit,
Yes, or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the “Editing
Values” section on page4-5.
Port settings Allow you to set the speed and duplex of the
network and access ports.
SW Port Configuration
PC Port Configuration
PC VLAN Allows the phone to work better with
non-Cisco switches. Strips the 802.1P/Q tags
from the packets going to a PC from the
access port on the phone.
PC VLAN
Table4-1 Settings that You can Change in the Network Configuration Menu (continued)
Category Description Network Configuration Menu Option