3-15
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
Chapter3 Setting Up the Cisco Unified IP Phone
Verifying the Phone Startup Process
Figure3-3 Parts Used in Wall Mounting the Cisco Unified IP Phone
Verifying the Phone Startup Process
After the Cisco Unified IP Phone has power connected to it, the phone begins its
startup process by cycling through the following steps.
1. These buttons flash on and off in sequence:
–
Headset. (Only if the handset is off-hook when the phone powers up. In
this case, hang up the handset within 3 seconds or the phone launches its
secondary load instead of its primary load.)
–
Mute.
–
Speaker.
1Footstand adjustment button—Raises and lowers adjustment plate
2Wall mounting screw holes
3Adjustment plate—Raises and lowers phone vertically