Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Using Cisco Unified IP Phones with Different Protocols

For detailed instructions about using BAT, refer to Cisco Unified CallManager Administration Guide and to Cisco Unified CallManager Bulk Administration Guide.

Related Topics

Adding Phones with Auto-Registration, page 2-14

Adding Phones with Auto-Registration and TAPS, page 2-15

Adding Phones with Cisco Unified CallManager Administration, page 2-16

Using Cisco Unified IP Phones with Different Protocols

The Cisco Unified IP Phone can operate with SCCP (Skinny Client Control Protocol) or SIP (Session Initiation Protocol). You can convert a phone that is using one protocol for use with the other protocol.

This section includes these topics:

Converting a New Phone from SCCP to SIP, page 2-18

Converting an In-Use Phone from SCCP to SIP, page 2-18

Converting an In-Use Phone from SIP to SCCP, page 2-19

Deploying a Phone in an SCCP and SIP Environment, page 2-19

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones

 

OL-11524-01

2-17

 

Page 81
Image 81
Cisco Systems 7970G manual Using Cisco Unified IP Phones with Different Protocols