Cisco Systems 7970G manual Power Save Configuration Menu

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Device Configuration Menu

Power Save Configuration Menu

The Power Save Configuration menu displays the settings that control when the LCD screen on a phone turns off to conserve power. Table 4-13describes the options on this menu.

For detailed information about configuring these settings, see the “Automatically Disabling the Cisco Unified IP Phone Touchscreen” section on page 6-11.

Table 4-13 Power Save Configuration Menu Options

Option	Description	To Change
Display On Time	Time each day that the LCD screen	Use Cisco Unified CallManager
	turns on automatically (except on the	Administration > Device > Phone >
	days specified in the Days Display Not	Phone Configuration.
	Active field).
Display On	Length of time that the LCD screen	Use Cisco Unified CallManager
Duration	remains on after turning on at the time	Administration > Device > Phone >
	shown in the Display On Time option.	Phone Configuration.
Display Idle	Length of time that the phone is idle	Use Cisco Unified CallManager
Timeout	before the display turns off. Applies	Administration > Device > Phone >
	only when the display was off as	Phone Configuration.
	scheduled and was turned on by an
	end-user (by pressing a button on the
	phone, touching the touchscreen, or
	lifting the handset).
Days Display Not	Days that the display does not turn on	Use Cisco Unified CallManager
Active	automatically at the time specified in	Administration > Device > Phone >
	the Display On Time option.	Phone Configuration.
Display On When	Indicates whether the LCD screen	Use Cisco Unified CallManager
Incoming Call	automatically illuminates when a call is	Administration > Device > Phone >
	received.	Phone Configuration.

	Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
4-32	OL-11524-01