Chapter6 Customizing the Cisco Unified IP Phone
Configuring the Idle Display
6-10
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
For detailed instructions about creating and displaying the idle display, refer to
Creating Idle URL Graphics on Cisco Unified IP Phone at this URL:
http://www.cisco.com/warp/public/788/AVVID/idle-url.html
In addition, you can refer to Cisco UnifiedCallManager Administration Guide or
to Cisco Unified CallManager Bulk Administration Guide for the following
information:
•Specifying the URL of the idle display XML service:
–
For a single phone—Idle field on the Cisco Unified CallManager Phone
Configuration page
–
For multiple phones simultaneously—URL Idle field on the
Cisco Unified CallManager Enterprise Parameters Configuration page,
or the Idle field in the Bulk Administration Tool (BAT)
•Specifying the length of time that the phone is not used before the idle display
XML service is invoked:
–
For a single phone—Idle Timer field on the CiscoUnified CallManager
Phone Configuration page
–
For multiple phones simultaneously—URL Idle Time field on the
Cisco Unified CallManager Enterprise Parameters Configuration page,
or the Idle Timer field in the Bulk Administration Tool (BAT)
From a phone, you can see settings for the idle display XML service URL and the
length of time that the phone is not used before this service is invoked. To see
these settings, choose Settings > Device Configuration and scroll to the Idle
URL and the Idle URL Time parameters.