Chapter6 Customizing the Cisco Unified IP Phone
Automatically Disabling the Cisco Unified IP Phone Touchscreen
6-12
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
Table6-1 Display On and Off Configuration Fields
Field Description
Days Display Not
Active
Days that the display does not turn on automatically at the
time specified in the Display On Time field.
Choose the day or days from the drop-down list. To choose
more than one day, Ctrl-click each day that you want.
Display On Time Time each day that the display turns on automatically
(except on the days specified in the Days Display Not
Active field).
Enter the time in this field in 24 hour format, where 0:00 is
midnight.
For example, to automatically turn the display on at
7:00 a.m., (0700), enter 7:00. To turn the display on at
2:00 p.m. (1400), enter 14:00.
If this field is blank, the display will automatically turn on
at 0:00.
Display On
Duration
Length of time that the display remains on after turning on
at the time specified in the Display On Time field.
Enter the value in this field in the format hours:minutes.
For example, to keep the display on for 4 hours and 30
minutes after it turns on automatically, enter 4:30.
If this field is blank, the phone will turn off at the end of
the day (0:00).
Note If Display On Time is 0:00 and the display on
duration is blank (or 24:00), the display will remain
on continuously.