Cisco Systems 7970G Adding Phones with Cisco Unified CallManager Administration, Adding Phones with BAT

Chapter2 Preparing to Install the Cisco Unified IP Phone o n Your Network
Adding Phones to the Cisco UnifiedCallManager Database
2-16
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.1 (SIP), Cisco Unified IP Phones
OL-11524-01
Adding Phones with Cisco Unified CallManager Administration
You can add phones individually to the CiscoUnified CallManager database
using Cisco UnifiedCallManager Administration. To do so, you first need to
obtain the MAC address for each phone.
For information about determining a MAC address, see the “Determining the
MAC Address of a Cisco UnifiedIP Phone” section on page 2-20.
After you have collected MAC addresses, choose Device > Add a New Device in
Cisco Unified CallManager Administration to begin.
For complete instructions and conceptual information about CiscoUnified
CallManager, refer to Cisco Unified CallManager Administration Guide and to
Cisco Unified CallManager System Guide.
Related Topics
•Adding Phones with Auto-Registration, page2-14
•Adding Phones with Auto-Registration and TAPS, page2-15
•Adding Phones with BAT, page 2-16
Adding Phones with BAT
The Cisco Bulk Administration Tool (BAT) is a plug-in application for
Cisco UnifiedCallManager that enables you to perform batch operations,
including registration, on multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you first need to
obtain the appropriate MAC address for each phone.
For information about determining a MAC address, see the “Determining the
MAC Address of a Cisco UnifiedIP Phone” section on page 2-20.