Cisco Systems URI Filtering, Add/Edit HTTP Policy Map (Security Level)

47-32
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter47 Configuring Inspection of Basic Internet Protocols
HTTP Inspection
Modes
The following table shows the modes in which this feature is available:
URI Filtering
The URI Filtering dialog box is accessible as follows:
Configuration> Global Objects > Inspect Maps > HTTP > URI Filtering
The URI Filtering dialog box lets you configure the settings for an URI filter.
Fields
•Match Type—Shows the match type, which can be a positive or negative match.
•Criterion—Shows the criterion of the inspection.
•Value—Shows the value to match in the inspection.
•Action—Shows the action if the match condition is met.
•Log—Shows the log state.
•Add—Opens the Add URI Filtering dialog box to add a URI filter.
•Edit—Opens the Edit URI Filtering dialog box to edit a URI filter.
•Delete—Deletes an URI filter.
•Move Up—Moves an entry up in the list.
•Move Down—Moves an entry down in the list.
Modes
The following table shows the modes in which this feature is available:
Add/Edit HTTP Policy Map (Security Level)
The Add/Edit HTTP Policy Map (Security Level) dialog box is accessible as follows:
Configuration> Global Objects > Inspect Maps > HTTP > HTTP Inspect Map > Basic View
The Add/Edit HTTP Policy Map pane lets you configure the security level and additional settings for
HTTP application inspection maps.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—