80-4
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter80 Managing Software and Configurations
Managing Files
Step1 Choose the CIFS mount-point you want to modify, and click Edit.
The Edit CIFS Mount Point dialog box appears.
Note You cannot change the CIFS mount-point name.
Step2 Make the changes to the remaining settings, and click OK when you are done.
To edit an FTP mount point, perform the following steps:
Step1 Choose the FTP mount-point you want to modify, and click Edit.
The Edit FTP Mount Point dialog box appears.
Note You cannot change the FTP mount-point name.
Step2 Make the changes to the remaining settings, and click OK when you are done.
Accessing a CIFS Mount Point
To access a CIFS mount point after it has been created, perform the following steps:
Step1 Start the ASA CLI.
Step2 Create the mount by entering the mount name of mount type cifs command.
Step3 Enter the show run mount command.
The following output appears:
Note In this example, win2003 is the name of the mount.
server kmmwin2003
share sharefolder
username webvpnuser2
password ********
status enable
Step4 Enter the dir command to list all enabled mounts as subdirectories, which is similar to mounting a drive
on the Windows PC. For example, in the following output, FTP2003:, FTPLINUX:, and win2K: are
configured mounts.
The following is sample output from the dir command:
FTP2003: Directory or file name
FTPLINUX: Directory or file name
WIN2003: Directory or file name
all-filesystems List files on all filesystems
disk0: Directory or file name
disk1: Directory or file name