72-55
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter72 Configuring Clientless SSL VPN
Configuring Port Forwarding
Step3 Scan to the DNS area and select the DNS server from the drop-down list. Note the domain name,
disregard the remaining steps, and go to the next section if ASDM displays the DNS server you want to
use. You need to enter the same domain name when you specify the remote server while configuring an
entry in the port forwarding list. Continue with the remaining steps if the DNS server is not present in
the configuration.
Step4 Click Manage in the DNS area.
The Configure DNS Server Groups window opens.
Step5 Click Configure Multiple DNS Server Groups.
A window displays a table of DNS server entries.
Step6 Click Add.
The Add DNS Server Group window opens.
Step7 Enter a new server group name in the Name field, and enter the IP address and domain name (see
Figure 72-12).