50-6
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter50 Configuring Inspection for Management Application Protocols
GTP Inspection
Figure50-1 GPRS Tunneling Protocol
The UMTS is the commercial convergence of fixed-line telephony, mobile, Internet and computer
technology. UTRAN is the networking protocol used for implementing wireless networks in this system.
GTP allows multi-protocol packets to be tunneled through a UMTS/GPRS backbone between a GGSN,
an SGSN and the UTRAN.
GTP does not include any inherent security or encryption of user data, but using GTP with the ASA helps
protect your network against these risks.
The SGSN is logically connected to a GGSN using GTP. GTP allows multiprotocol packets to be
tunneled through the GPRS backbone between GSNs. GTP provides a tunnel control and management
protocol that allows the SGSN to provide GPRS network access for a mobile station by creating,
modifying, and deleting tunnels. GTP uses a tunneling mechanism to provide a service for carrying user
data packets.
Note When using GTP with failover, if a GTP connection is established and the active unit fails before data
is transmitted over the tunnel, the GTP data connection (with a “j” flag set) is not replicated to the
standby unit. This occurs because the active unit does not replicate embryonic connections to the standby
unit.
Select GTP Map
Add/Edit Service Policy Rule Wizard> Rule Actions > Protocol Inspection Tab>Select GTP Map
The Select GTP Map dialog box lets you select or create a new GTP map. A GTP map lets you change
the configuration values used for GTP application inspection. The Select GTP Map table provides a list
of previously configured maps that you can select for application inspection.
Note GTP inspection requires a special license. If you try to enable GTP application inspection on a
ASA without the required license, the ASA displays an error message.
119935
Internet
Corporate
network 2
Corporate
network 1
Home PLMN
Gn
Gp
GRX
Roaming partner
(visited PLMN)
MS
SGSN GGSN Gi