Cisco Systems Add/Edit HSI Group

48-12
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter48 Configuring Inspection for Voice and Video Protocols
H.323 Inspection
– Delete—Deletes an HSI group.
•Inspections—Tab that shows you the H.323 inspection configuration and lets you add or edit.
– Match Type—Shows the match type, which can be a positive or negative match.
– Criterion—Shows the criterion of the H.323 inspection.
– Value—Shows the value to match in the H.323 inspection.
– Action—Shows the action if the match condition is met.
– Log—Shows the log state.
– Add—Opens the Add H.323 Inspect dialog box to add an H.323 inspection.
– Edit—Opens the Edit H.323 Inspect dialog box to edit an H.323 inspection.
– Delete—Deletes an H.323 inspection.
– Move Up—Moves an inspection up in the list.
– Move Down—Moves an inspection down in the list.
Modes
The following table shows the modes in which this feature is available:
Add/Edit HSI Group
Configuration> Global Objects > Inspect Maps > H323 > H323 Inspect Map > Advanced View >
Add/Edit HSI Group
The Add/Edit HSI Group dialog box lets you configure HSI Groups.
Fields
•Group ID—Enter the HSI group ID.
•IP Address—Enter the HSI IP address.
•Endpoints—Lets you configure the IP address and interface of the endpoints.
– IP Address—Enter an endpoint IP address.
– Interface—Specifies an endpoint interface.
•Add—Adds the HSI group defined.
•Delete—Deletes the selected HSI group.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—