Cisco Systems View/Config Banner, Add/Edit Internal Group Policy > Client Configuration > Cisco Client Parameters

69-34
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter69 General VPN Setup
ACL Manager
– Add—Moves the name of an address pool from the Available Pools list to the Assigned Pools
list.
– Remove—Moves the name of an address pool from the Assigned Pools list to the Available
Pools list.
– Assigned Pools (up to 6 entries)—Lists the address pools you have added to the assigned pools
list. The address-pools settings in this table override the local pool settings in the group. You
can specify a list of up to six local address pools to use for local address allocation. The order
in which you specify the pools is significant. The ASA allocates addresses from these pools in
the order in which the pools appear in this command.
Modes
The following table shows the modes in which this feature is available:
View/Config Banner
The View/Config Banner dialog box lets you enter up to 500 characters of text in the text field to display
as a banner for the specified client.
Note A carriage return/line feed, created by pressing Enter, counts as 2 characters.
Modes
The following table shows the modes in which this feature is available:
Add/Edit Internal Group Policy > Client Configuration > Cisco Client Parameters
This dialog box configures client attributes that are specific to Cisco clients, including password storage,
enabling or disabling IPsec over UDP and setting the UDP port number, and configuring IPsec backup
servers.
Fields
•Store Password on Client System—Enables or disables storing the password on the client system.
Note Storing the password on a client system can constitute a potential security risk.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
•—•——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
•—•——