Cisco Systems Configuration Example for Route Maps, Feature History for Route Maps

26-8
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter26 Defining Route Maps
Configuration Example for Route Maps
Configuration Example for Route Maps
The following example shows how to redistribute routes with a hop count equal to 1 into OSPF.
Step1 In ASDM, choose Configuration > Device Setup > Routing > Route Maps.
Step2 Click Add.
Step3 Enter 1-to-2 in the Route Map Name field.
Step4 Enter the routing sequence number in the Sequence Number field.
Step5 Click the Permit radio button.
By default this tab is on top.
Step6 Click the Match Clause tab.
Step7 Check the Match Metric of Route check box and type 1 for the metric value.
Step8 Click the Set Clause tab.
Step9 Check the Set Metric Value check box, and type 5 for the metric value.
Step10 Check the Set Metric-Type check box, and choose Type-1 .
Feature History for Route Maps
Table26-1 lists each feature change and the platform release in which it was implemented. ASDM is
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table26-1 Feature History for Route Maps
Feature Name
Platform
Releases Feature Information
Route maps 7.0(1) We introduced this feature.
We introduced the following screen: Configuration >
Device Setup > Routing > Route Maps.
Enhanced support for static and dynamic route
maps
8.0(2) Enhanced support for dynamic and static route maps was
added.