Cisco Systems Enabling or Disabling Host Scan

69-127
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter69 General VPN Setup
Configuring AnyConnect Host Scan
Step2 Open ASDM and choose Configuration > Remote Access VPN > Host Scan Image. ASDM opens the
Host Scan Image panel (Figure 69-7).
Figure69-7 Host Scan Image Panel
Step3 Click Upload to prepare to transfer a copy of the Host Scan package from your computer to a drive on
the ASA.
Step4 In the Upload Image dialog box, click Browse Local Files to search for the Host Scan package on your
local computer.
Step5 Select the hostscan_version.pkg file or anyconnect-NGC-win-version-k9.pkg file you downloaded in
Step 1 and click Select. The path to the file you selected is in the Local File Path field and the Flash File
System Path field reflects the destination path of the Host Scan package. If your ASA has more than one
flash drive, you can edit the Flash File System Path to indicate another flash drive.
Step6 Click Upload File. ASDM transfers a copy of the file to the flash card. An Information dialog box
displays the following message:
File has been uploaded to flash successfully.
Step7 Click OK.
Step8 In the Use Uploaded Image dialog, click OK to use the Host Scan package file you just uploaded as the
current image.
Step9 Check Enable Host Scan/CSD if it is not already checked.
Step10 Click Apply.
Note If AnyConnect Essentials is enabled on the ASA, you receive a message that CSD will not work
with it. You have the choice to Disable or Keep AnyConnect Essentials.
Step11 From the File menu, select Save Running Configuration To Flash.
Enabling or Disabling Host Scan
When you first install or upgrade a Host Scan image using ASDM, you enable the image as part of that
procedure. See “Installing and Enabling Host Scan on the ASA” section on page69-126.