69-23
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter69 General VPN Setup
ACL Manager
Browse ICMP
The Browse ICMP dialog box lets you select an ICMP group for this rule.
Fields
•Add—Opens the Add ICMP Group dialog box, in which you can configure a new TCP service
group.
•Find—Opens the Filter field.
•Filter/Clear—Specifies a filter criterion that you can use to search for items in the Name list, thus
displaying only those items that match that criterion. When you make an entry in the Filter field, the
Filter button becomes active. Clicking the Filter button performs the search. After you perform the
search, the Filter button is dimmed, and the Clear button becomes active. Clicking the Clear button
clears the filter field and dims the Clear button.
•Type—Determines the type of object to use as the ICMP group for this rule. Selections are IP
Address Objects, IP Names, Network Object Groups, and All. The contents of the table following
this field change, depending upon your selection.
•Name—Lists the predefined ICMP groups for your selection.
Modes
The following table shows the modes in which this feature is available:
Add ICMP Group
The Add ICMP Group dialog box lets you configure a new a ICMP group by name or by number to add
to the browsable ICMP list for this protocol in this rule. Choosing a member of either the Members not
in Group or the Members in Group list activates the Add and Remove buttons.
Fields
•Group Name—Specifies the name of the new TCP service group.
•Description—(Optional) Provides a brief description of this group.
•Members not in Group—Presents the option to select either an ICMP type/ICMP group or an ICMP
number to add to the Members in Group list.
•ICMP Type/ICMP Group—Selects the option to select the name of an ICMP group to add to the
Members in Group list.
•ICMP #—Selects the option to specify an ICMP member by number to add to the Members in Group
list.
•Add—Moves a selected item from the Members not in Group list to the Members in Group list.
•Remove—Moves a selected item from the Members in Group list to the Members not in Group list.
•Members in Group—Lists the members already configured in this service group.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
•—•——