Cisco Systems Adding or Editing a Syslog Message ID Filter, Sending Syslog Messages to the Console Port, Sending Syslog Messages to a Telnet or SSH Session, Creating a Custom Event List

76-16
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter76 Configuring Logging
Configuring Logging
Step3 Click OK when you are done making selections.
Adding or Editing a Syslog Message ID Filter
To add or edit a syslog message ID filter, see the “Editing Syslog ID Settings” section on page76-10.
Sending Syslog Messages to the Console Port
To send syslog messages to the console port, enter the following command:
Sending Syslog Messages to a Telnet or SSH Session
To send syslog messages to a Telnet or SSH session, perform the following steps:
Creating a Custom Event List
You use the following three criteria to define an event list:
•Event Class
•Severity
•Message ID
To create a custom list of events to send to a specific logging destination (for example, an SNMP server),
perform the following steps:
Path Purpose
Choose one of the following:
•Home > Latest ASDM Syslog Messages > Configure
ASDM Syslog Filters
•Configuration > Device Management > Logging >
Logging Filters
Specifies which syslog messages should be sent to the console
port.
Path Purpose
Step1 Choose one of the following:
•Home > Latest ASDM Syslog Messages > Configure
ASDM Syslog Filters
•Configuration > Device Management > Logging >
Logging Filters
Specifies which syslog messages should be sent to a
Telnet or SSH session.
Step2 Configuration > Device Management > Logging >
Logging Setup
Enables logging to the current session only.