Cisco Systems Add/Edit RTSP Inspect

48-23
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter48 Configuring Inspection for Voice and Video Protocols
RTSP Inspection
Modes
The following table shows the modes in which this feature is available:
Add/Edit RTSP Inspect
Configuration> Global Objects > Inspect Maps > SIP > SIP Inspect Map > Advanced View >
Add/Edit SIP Inspect
The Add/Edit RTSP Inspect dialog box lets you define the match criterion, values, and actions for the
RTSP inspect map.
Fields
•Match Type—Specifies whether traffic should match or not match the values.
For example, if No Match is selected on the string “example.com,” then any traffic that contains
“example.com” is excluded from the class map.
•Criterion—Specifies which criterion of RTSP traffic to match.
– URL Filter—Match URL filtering.
– Request Method—Match an RTSP request method.
•URL Filter Criterion Values—Specifies to match URL filtering. Applies the regular expression
match.
– Regular Expression—Lists the defined regular expressions to match.
– Manage—Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
– Regular Expression Class—Lists the defined regular expression classes to match.
– Manage—Opens the Manage Regular Expression Class dialog box, which lets you configure
regular expression class maps.
•URL Filter Actions—Primary action and log settings.
– Action—Drop connection or log.
– Log—Enable or disable.
•Request Method Criterion Values—Specifies to match an RTSP request method.
– Request Method—Specifies a request method: announce, describe, get_parameter, options,
pause, play, record, redirect, setup, set_parameters, teardown.
•Request Method Actions—Primary action settings.
– Action—Limit rate (pps).
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—