69-17
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter69 General VPN Setup
ACL Manager
–
Daily End Time (inclusive)—Specifies the hour and minute, in 24-hour format, when you want
the recurring time range to end on each selected day.
•Specify a weekly interval when this recurring range will be active—Makes available the options in
the Weekly Interval area. The range extends inclusively through the end time. All times in this area
are in 24-hour format. For example, use this option when you want the time range to be active
continuously from Monday at 8:00 AM through Friday at 4:30 PM.
–
From—Selects the day, hour, and minute when you want the weekly time range to start.
–
Through—Selects the day, hour, and minute when you want the weekly time range to end.
Modes
The following table shows the modes in which this feature is available:
ACL Manager
The ACL Manager dialog box lets you define access control lists (ACLs) to control the access of a
specific host or network to another host/network, including the protocol or port that can be used.
You can configure ACLs (access control lists) to apply to user sessions. These are filters that permit or
deny user access to specific networks, subnets, hosts, and web servers.
•If you do not define any filters, all connections are permitted.
•The ASA supports only an inbound ACL on an interface.
•At the end of each ACL, there is an implicit, unwritten rule that denies all traffic that is not
permitted. If traffic is not explicitly permitted by an access control entry (ACE), the ASA denies it.
ACEs are referred to as rules in this section.

Standard ACL

This pane provides summary information about standard ACLs, and lets you add or edit ACLs and ACEs.
Fields
•Add—Lets you add a new ACL. When you highlight an existing ACL, it lets you add a new ACE
for that ACL.
•Edit—Opens the Edit ACE dialog box, in which you can change an existing access control list rule.
•Delete—Removes an ACL or ACE. There is no confirmation or undo.
•Move Up/Move Down—Changes the position of a rule in the ACL Manager table.
•Cut—Removes the selection from the ACL Manager table and places it on the clipboard.
•Copy—Places a copy of the selection on the clipboard.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—