Cisco Systems Browse Source/Destination Address, Browse Source/Destination Port

69-21
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter69 General VPN Setup
ACL Manager
Modes
The following table shows the modes in which this feature is available:
Browse Source/Destination Address
The Browse Source or Destination Address dialog box lets you select an object to use as a source or
destination for this rule.
Fields
•Type—Determines the type of object to use as the source or destination for this rule. Selections are
IP Address Objects, IP Names, Network Object Groups, and All. The contents of the table following
this field change, depending upon your selection.
•Source/Destination Object Table—Displays the objects from which you can select a source or
destination object. If you choose All in the type field, each category of object appears under its own
heading. The table has the following headings:
– Name—Displays the network name (which may be an IP address) for each object.
– IP address—Displays the IP address of each object.
– Netmask—Displays the network mask to use with each object.
– Description—Displays the description entered in the Add/Edit/Paste Extended Access List Rule
dialog box.
Modes
The following table shows the modes in which this feature is available:
Browse Source/Destination Port
The Browse Source or Destination Port dialog box lets you select a source or destination port for this
protocol in this rule.
Fields
•Add—Opens the Add TCP Service Group dialog box, in which you can configure a new TCP service
group.
•Find—Opens the Filter field.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
•—•——
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
•—•——