Cisco Systems Adding and Editing a Service Group

20-7
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter20 Configuring Objects
Configuring Service Objects and Service Groups
•Service Group—Edit Service Group appears.
•Protocol Group—Edit Protocol Group window appears.
Step4 Enter the necessary changes.
Step5 Click OK to save the configuration.
Note You can also click Delete to delete a service object.
Adding and Editing a Service Group
You can associate multiple service objects into a named service group. You can specify any type of
protocol and service in one group or create service groups for each of the following types:
•TCP ports
•UDP ports
•ICMP types
•IP protocols
Multiple service groups can be nested into a “group of groups” and used as a single group.
This section includes the following topics:
•Adding a Service Group, page20-7
•Editing a Service Group, page20-8
Adding a Service Group
To add a service object or service group, perform the following steps:
Step1 In the Configuration > Firewall > Objects > Service Object/Group pane, click Add.
Step2 Choose Service Group from the drop-down list.
The Add Service Group dialog box appears.
Step3 In the Name field, enter a name for the new service group. The name can be up to 64 characters in length
and must be unique for all object groups. A service group name cannot share a name with a network
object group.
Step4 In the Description field, enter a description for this service group, up to 200 characters in length.
Step5 By default you can add a service group from an existing service/service group. Select the group from the
Name field, and click Add to add the service to the group.
Optionally, you can create a new member: