Cisco Systems Add/Edit FTP Policy Map (Security Level)

47-20
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter47 Configuring Inspection of Basic Internet Protocols
FTP Inspection
Modes
The following table shows the modes in which this feature is available:
Add/Edit FTP Policy Map (Security Level)
The Add/Edit FTP Policy Map dialog box is accessible as follows:
Configuration> Global Objec ts > Inspect Maps > FTP > FTP Inspect Map > Basic View
The Add/Edit FTP Policy Map pane lets you configure the security level and additional settings for FTP
application inspection maps.
Fields
•Name—When adding an FTP map, enter the name of the FTP map. When editing an FTP map, the
name of the previously configured FTP map is shown.
•Description—Enter the description of the FTP map, up to 200 characters in length.
•Security Level—Select the security level (medium or low).
– Low
Mask Banner Disabled
Mask Reply Disabled
– Medium—Default.
Mask Banner Enabled
Mask Reply Enabled
– File Type Filtering—Opens the Type Filtering dialog box to configure file type filters.
– Default Level—Sets the security level back to the default level of Medium.
•Details—Shows the Parameters and Inspections tabs to configure additional settings.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—