48-22
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter48 Configuring Inspection for Voice and Video Protocols
RTSP Inspection
Fields
•RTSP Inspect Maps—Table that lists the defined RTSP inspect maps.
•Add—Configures a new RTSP inspect map.
•Edit—Edits the selected RTSP entry in the RTSP Inspect Maps table.
•Delete—Deletes the inspect map selected in the RTSP Inspect Maps table.
Modes
The following table shows the modes in which this feature is available:
Add/Edit RTSP Policy Map
Configuration> Global Objec ts > Inspect Maps > MGCP > MGCP Inspect Map > View
The Add/Edit RTSP Policy Map pane lets you configure the parameters and inspections settings for
RTSP application inspection maps.
Fields
•Name—When adding an RTSP map, enter the name of the RTSP map. When editing an RTSP map,
the name of the previously configured RTSP map is shown.
•Description—Enter the description of the RTSP map, up to 200 characters in length.
•Parameters—Tab that lets you restrict usage on reserved ports during media port negotiation, and
lets you set the URL length limit.
–
Enforce Reserve Port Protection—Lets you restrict the use of reserved ports during media port
negotiation.
–
Maximum URL Length—Specifies the maximum length of the URL allowed in the message.
Maximum value is 6000.
•Inspections—Tab that shows you the RTSP inspection configuration and lets you add or edit.
–
Match Type—Shows the match type, which can be a positive or negative match.
–
Criterion—Shows the criterion of the RTSP inspection.
–
Value—Shows the value to match in the RTSP inspection.
–
Action—Shows the action if the match condition is met.
–
Log—Shows the log state.
–
Add—Opens the Add RTSP Inspect dialog box to add a RTSP inspection.
–
Edit—Opens the Edit RTSP Inspect dialog box to edit a RTSP inspection.
–
Delete—Deletes a RTSP inspection.
–
Move Up—Moves an inspection up in the list.
–
Move Down—Moves an inspection down in the list.
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—