63-12
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter63 Configuring the ASA CX Module
Configuring the ASA CX Module
Step2 Choose Add > Add Service Policy Rule. The Add Service Policy Rule Wizard - Service Policy dialog
box appears.
Step3 Complete the Service Policy dialog box, and then the Traffic Classification Criteria dialog box as
desired. See the ASDM online help for more information about these screens.
Step4 Click Next to show the Add Service Policy Rule Wizard - Rule Actions dialog box.
Step5 Click the ASA CX Inspection tab.
Step6 Check the Enable ASA CX for this traffic flow check box.
Step7 In the If ASA CX Card Fails area, click Permit traffic or Close traffic. The Close traffic option sets the
ASA to block all traffic if the ASA CX module is unavailable. The Permit traffic option sets the ASA to
allow all traffic through, uninspected, if the ASA CX module is unavailable.
Step8 To enable the authentication proxy, which is required for active authentication, check the Enable Auth
Proxy check box.
Step9 Click OK and then Apply.