Cisco Systems CSC Setup Wizard Password Configuration, CSC Setup Wizard Traffic Selection for CSC Scan

9-10
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter9 Configuring Trend Micro Content Security
CSC SSM Setup
Step3 To remove the IP address of a network or host whose ability to connect to the CSC SSM you no longer
want, click Delete.
The Selected Hosts/Networks table lists the IP addresses of networks and hosts whose connection to the
CSC SSM you have added.
What to Do Next
See the “CSC Setup Wizard Password Configuration” section on page9-10.
CSC Setup Wizard Password Configuration
To change the password required for management access to the CSC SSM, perform the following steps:
Step1 Choose Configuration > Trend Micro Content Security > CSC Setup > Password.
Step2 In the Old Password field, enter the current password for management access to the CSC SSM.
Step3 In the New Password field, enter the new password for management access to the CSC SSM.
Step4 In the Confirm New Password field, reenter the new password for management access to the CSC SSM.
What to Do Next
See the “CSC Setup Wizard Traffic Selection for CSC Scan” section on page9-10.
CSC Setup Wizard Traffic Selection for CSC Scan
To display the settings that you have made to select traffic for CSC scanning, perform the following
steps:
Step1 Choose Configuration > Trend Micro Content Security > CSC Setup > Traffic Selection for CSC
Scan.
The traffic selection for CSC scanning configuration settings that you have entered for the CSC SSM
appear, including the following:
•The interface to the CSC SSM that you have chosen from the drop-down list.
•The source of network traffic for the CSC SSM to scan.
•The destination of network traffic for the CSC SSM to scan.
•The source or destination service for the CSC SSM to scan.
Step2 Do one of the following:
•To specify additional traffic details for CSC scanning, click Add. For more information, see
“Specifying Traffic for CSC Scanning” section on page9-11.
•To modify additional traffic details for CSC scanning, click Edit. For more information, see
“Specifying Traffic for CSC Scanning” section on page9-11.