30-12
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter30 Configuring EIGRP
Customizing EIGRP
To redistribute routes into the EIGRP routing process, perform the following steps:
Step1 In the main ASDM window, choose Configuration > Device Setup > Routing > EIGRP > Setup.
The EIGRP Setup pane appears.
Step2 Check the Enable EIGRP routing check box.
Step3 In the EIGRP Process field, enter the AS number for the EIGRP process. The AS number can range from
1 to 65535.
Step4 Choose Configuration > Device Setup > Routing > EIGRP > Redistribution.
The Redistribution pane displays the rules for redistributing routes from other routing protocols to the
EIGRP routing process. When redistributing static and connected routes to the EIGRP routing process,
metrics are not required to be configured, although this is recommended. Each row of the Redistribution
pane table includes a route redistribution entry.
Step5 Click Add to add a new redistribution rule. If you are editing an existing redistribution rule, go to Step 6.
The Add EIGRP Redistribution Entry dialog box appears.
Step6 Choose the address in the table and click Edit to edit an existing EIGRP static neighbor, You can also
double-click an entry in the table to edit that entry.
The Edit EIGRP Redistribution Entry dialog box appears.
Step7 Choose the AS number of the EIGRP routing process to which the entry applies from the drop-down list.
Step8 In the Protocol area, click the radio button next to one of the following protocols for the routing process:
•Static to redistribute static routes to the EIGRP routing process. Static routes that fall within the
scope of a network statement are automatically redistributed into EIGRP; you do not need to define
a redistribution rule for them.
•Connected to redistribute connected routes into the EIGRP routing process. Connected routes that
fall within the scope of a network statement are automatically redistributed into EIGRP; you do not
need to define a redistribution rule for them.
•RIP to redistributes routes discovered by the RIP routing process to EIGRP.
•OSPF to redistribute routes discovered by the OSPF routing process to EIGRP.
Step9 In the Optional Metrics area, choose one of the following metrics used for the redistributed route:
•Bandwidth, which is the EIGRP bandwidth metric in kilobits per second. Valid values range from
1 to 4294967295.
•Delay, which is the EIGRP delay metric, in 10-microsecond units. Valid values range from 0 to
4294967295.
•Reliability, which is the EIGRP reliability metric. Valid values range from 0 to 255; 255 indicates
100 percent reliability.
•Loading, which is the EIGRP effective bandwidth (loading) metric. Valid values range from 1 to
255; 255 indicates 100 percent loaded.
•MTU, which is the MTU of the path. Valid values range from 1 to 65535.
Step10 Choose the route map from the Route Map drop-down list to define which routes are redistributed into
the EIGRP routing process. For more details about how to configure a route map, see Chapter26,
“Defining Route Maps.”
Step11 In the Optional OSPF Redistribution area, click one of the following OSPF radio buttons to further
specify which OSPF routes are redistributed into the EIGRP routing process: