5-3
ASDM configuration guide
Chapter5 Using the Startup Wizard
Startup Wizard Screens
Basic Configuration
•(ASA 5505) To specify a group of configuration settings for a remote worker, check the Configure
the device for Teleworker usage check box. See the “Easy VPN Remote Configuration (ASA 5505,
Single Mode, Routed Mode)” section on page5-4 for more information.
•For information about the hostname, domain name, and enable password, see the “Configuring the
Hostname, Domain Name, and Passwords” section on page17-1.
Interface Screens
The interface screens depend on the mode and model. This section includes the following topics:
•Interface Selection (ASA 5505), page5-3
•Switch Port Allocation (ASA 5505), page5-3
•Interface IP Address Configuration (ASA 5505, Routed Mode), page5-3
•Interface Configuration - PPPoE (ASA 5505, Routed Mode, Single Mode), page5-3
•Outside Interface Configuration - PPPoE (ASA 5510 and Higher, Routed Mode, Single Mode),
page 5-4
•Interface Selection (ASA 5505), page5-3
•Other Interfaces Configuration (ASA 5510 and Higher), page5-4

Interface Selection (ASA 5505)

This screen lets you group the eight, Fast Ethernet switch ports on the ASA 5505 into three VLANs.
These VLANs function as separate, Layer 3 networks. You can then choose or create the VLANs that
define your network—one for each interface: Outside, Inside, or DMZ (DMZ is available in routed mode
only). A DMZ is a separate network located in the neutral zone between a private (inside) network and
a public (outside) network.
See the “Configuring VLAN Interfaces” section on page 13-6 for more information.

Switch Port Allocation (ASA 5505)

This screen lets you allocate switch ports to Outside, Inside, or DMZ interfaces (DMZ is only available
in routed mode). By default, all switch ports are assigned to VLAN 1 (Inside).
See the “Configuring VLAN Interfaces” section on page 13-6 for more information.

Interface IP Address Configuration (ASA 5505, Routed Mode)

Configure the IP address of each VLAN interface. See the “Configuring General Interface Parameters”
section on page 14-6 for more information..

Interface Configuration - PPPoE (ASA 5505, Routed Mode, Single Mode)

Configure the PPoE settings for each interface. See the “PPPoE IP Address and Route Settings” section
on page 14-10 for more information.