Cisco Systems XR 12406 manual Figure B-2 Securing the Router to the Pallet Base

Appendix B Repacking the Router

Repacking the Router

Figure B-2 Securing the Router to the Pallet Base

ROUTE PROCESSOR

CISCO 12000

GIGABIT SWITCH ROUTER

57679

To repack the router, follow these steps:

Step 1 Place the router on the pallet base.

Step 2 Install the two anchor clips on the front of the chassis (see Figure B-2):

a.Set the hold-down clips in the bottom holes of the rack-mounting flanges on either side of the chassis.

b.Align the bolt holes in the anchor clips with the bolt holes in the pallet base.

c.Insert and loosely tighten the bolts to secure the anchor clips to the pallet base.

	Cisco XR 12406 Router Installation Guide
OL-13831-01		B-5