Cisco Systems XR 12406 manual Unseating the DC Power Supply

Chapter 5 Maintaining the Router

Removing and Replacing a DC PDU

Step 2 Power off the circuit breakers assigned to the PEMs.

Step 3 Loosen the captive screw on each ejector lever and pivot the levers open to unseat the power supply from its PDU connector (Figure 5-19).

•It is not necessary to remove the power supply from its bay.

•Repeat this step for the second power supply.

Figure 5-19 Unseating the DC Power Supply

OUTPUT
OK	INPUT	M	ISWIRE
	OK

101116

	Cisco XR 12406 Router Installation Guide
OL-13831-01		5-33