Cisco Systems XR 12406 manual Appendix B Repacking the Router

Appendix B Repacking the Router

Repacking the Router

Step 3 Install the angle brackets on the sides of the chassis (see Figure B-2):

a.Set the side of the bracket with the three screw holes against the side of the chassis and align the holes with the holes in the side of the chassis.

b.Insert and loosely tighten the three screws you saved when the chassis was unpacked.

c.Align the bolt holes in the angle brackets with the bolt holes in the pallet base.

d.Insert and loosely tighten the bolts to secure the brackets to the pallet base.

Step 4 Place the plastic bag cover over the router (see Figure B-1).

Step 5 Place the accessory kit on top of the router (see Figure B-1).

Step 6 Place the cardboard carton over the accessory kit and router (see Figure B-1).

Step 7 Secure the cardboard carton to the pallet with plastic-type straps similar to the ones used to ship the router to you (see Figure B-3).

The router is ready for shipment.

	Cisco XR 12406 Router Installation Guide
B-6	OL-13831-01