Cisco Systems XR 12406 manual PRP Console and Auxiliary Port Connections

Chapter 3 Installing the Cisco XR 12406 Router

Connecting to the Console and Auxiliary Ports

Check your terminal’s documentation to determine the baud rate of the terminal you plan to use. If your documentation does not specify settings use the following terminal settings:

1.Baud to 9600

2.Data bits to 8

3.Parity to no parity

4.Stop bits to 2

The console port requires a straight-through RJ-45 cable.

Note To comply with Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety, connect all console, auxiliary, Ethernet, and BITS interfaces only to intrabuilding or non-exposed wiring or cabling. The intrabuilding cable must be shielded and the shield must be grounded at both ends.

Figure 3-8 PRP Console and Auxiliary Port Connections

		S
		L S
		O
		T LO
	PRIMARY	-	T
		0	ETH
			-
			1
	L		0
1	IN
	K E
		N
		T
		X R
	PRIMARY	X
			ETH
	L		1
	IN
	K E
	3	N
		T
		X R
		X
			AUX
			CONSOLE

2

4

5

70692

		1	Modem	4	Auxiliary port
2			Console terminal	5	Console port
3			RJ-45 Ethernet cables	–	—
	Cisco XR 12406 Router Installation Guide
3-16					OL-13831-01