Datalogic Scanning 8500 General Scanner and Scale Features, Double Read Timeout, 1.Scan the SWITCH bar code, To set the Double Read Timeout:

General Scanner and Scale Features

Double Read Timeout

The Double Read Timeout feature sets a time limit that determines how much time must pass before reading the same label again (e.g. two identical items in succession).

To set the Double Read Timeout:1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

If the incidence of multiple reads is not acceptable, increase the Double Read

Timeout setting to a higher value.

NOTE

DOUBLE READ TIMEOUT = 400ms

DOUBLE READ TIMEOUT = 600ms

Product Reference Guide 6-11