Code 93 Length Control

This feature specifies whether variable-length or fixed-length decoding will be set for Code 93.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

 

If variable-length control was selected, you must now set the features

 

Code 93 Maximum Label Length and Code 93 Minimum Label

 

Length. If fixed-length control was selected, you must now set Code 93

NOTE

Fixed Length 1 and Code 93 Fixed Length 2.

 

CODE 93 LENGTH CONTROL = VARIABLE-LENGTH

CODE 93 LENGTH CONTROL = FIXED-LENGTH

Product Reference Guide

6-243