Scale Automatic Zeroing

This feature enables/disables automatic zeroing of the scale if it goes under zero. If an under-zero condition is detected and persists for at least five seconds, the scale will be zeroed as it the zero button had been pressed. This feature ensures accurate weighing by automatically zeroing after under-zero conditions are detected, such as after the platter has been cleared.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the two bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

SCALE AUTOMATIC ZEROING = DISABLE

SCALE AUTOMATIC ZEROING = ENABLE

Product Reference Guide

6-37