Datalogic Scanning 8500 I 2 of 5 Maximum Label Length, To set this feature:, 2. Scan the bar code, 1. Scan the SWITCH bar code

I 2 of 5 Maximum Label LengthThis feature specifies the maximum allowable length of an I 2 of 5 label.

	Length in this case includes check and data characters, but does not
	include start or stop characters. This feature applies when I 2 of 5
	Length Control is set to variable-length decoding.
NOTE	Maximum label length should be greater than or equal to minimum label
	length.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan the bar code, SET I 2 OF 5 MAXIMUM LABEL LENGTH below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3. Scan the appropriate digits from the keypad in Appendix C that represent the desired maximum label length. The selectable range for this option is 02 to 50, even numbers only. Pad all single digit numbers with a leading zero to yield a two-digit entry (02-50).

4. Complete the programming sequence by scanning the SWITCH bar code.

SET I 2 OF 5 MAXIMUM LABEL LENGTH

6-220 Magellan® 8500 Scanner