Datalogic Scanning 8500 Scan the bar code, To set this feature:, Scan the SWITCH bar code, 1.Scan the SWITCH bar code, Scan the appropriate digits from the keypad in

Standard 2 of 5 Fixed Length 2

This feature specifies Standard 2 of 5 second fixed length.

This applies when Standard 2 of 5 Length Control is set to fixed- length decoding.

NOTE If Fixed Length 2 is set to 00 (zero), then Fixed Length 1 will apply.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan the bar code, SET STANDARD 2 OF 5 FIXED LENGTH 2 below. You’ll need to cover any unused bar codes on this and the fac- ing page to ensure that the scanner reads only the bar code you intend to scan.

3.Scan the appropriate digits from the keypad in Appendix C that rep- resent the desired fixed label length. The selectable range for this option is 1 to 50. Pad all single digit numbers with a leading zero to yield a two-digit entry (01-50).

4.Complete the programming sequence by scanning the SWITCH bar code.

SET STANDARD 2 OF 5 FIXED LENGTH 2

6-270 Magellan® 8500 Scanner