Datalogic Scanning 8500 •x80 = function code, •x81 = function code, •x82 = function code, •x83 = function code, •Example: '#Code_128.Test, Codabar Start Stop Char- acter Match

Codabar

•Check character must be included in label data.

•Label length including check character and excluding prefix char- acter must meet requirements imposed by the main scanner's fixed or variable label length control for this symbology type.

•Prefix must be an ASCII character '%'.

•Start stop character sets must meet the matching requirement set forth by the scanner configuration item Codabar Start Stop Char- acter Match.

•Start stop character sets must be of the form ABCD/ABCD and must be included in the label.

•Example: '%s$99.95s' (the lower case ‘s’ at each end of the exam- ple is a placeholder for the start stop character set).

Code 128

•Prefix must be an ASCII character '#'.

•Label length excluding prefix character must meet requirements imposed by the main scanner's fixed or variable label length con- trol for this symbology type.

•Function characters may be transmitted as a hexadecimal value8x. Where x correlates to function characters 1 thru 4 as follows:•x80 = function code 1•x81 = function code 2•x82 = function code 3•x83 = function code 4

•For Code 128 programming labels the format is of the general form '#/82nnnnn/r ' - /82 is hexadecimal 82 and /r is carriage return.

•Example: '#Code_128.Test'.

F-8 Magellan® 8500 Scanner