Datalogic Scanning 8500 Standard 2 of 5 Check Character Calculation

Standard 2 of 5 Check Character Calculation

Enables/disables calculation and verification of an optional Standard 2 of 5 check character.

If check character calculation is disabled, the risk is increased that a mis-

read can occur. When disabled, any check character in a bar code is treated as data character.

NOTE

To set this feature:

1.Scan the SWITCH bar code.

2.Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

STANDARD 2 of 5 CHECK CHARACTER CALCULATION = DISABLE

STANDARD 2 of 5 CHECK CHARACTER CALCULATION = ENABLE

6-262 Magellan® 8500 Scanner