Datalogic Scanning 8500 NOTE, Figure 2-9.Remove Protective Vinyl, BE REMOVED before placing the unit into service, •Carefully lift off the All Weighs™ Platter as shown in

•Lift out the accessory box containing the AC/DC Power Supply, optional Remote Scale Display and cable (if present), and the Quick Reference Guide.

•Remove the Quick Reference Guide and familiarize yourself with the unit’s controls and features. Leave the guide at the checkstand when the installation is complete.

•Remove the protective packing and carefully lift the unit from the carton. Be sure to save the box and all packing material. In the event of failure, the unit must be returned to the factory in its original packaging.

•Carefully lift off the All Weighs™ Platter as shown in

Figure 2-18and remove the protective foam pieces securing the weigh mechanism. Set the platter back in place.

For added protection during shipment, the All Weighs™ Platter is covered

with a tight-fitting layer of vinyl as shown in Figure 2-9.This vinyl layer MUST

BE REMOVED before placing the unit into service.

NOTE

Figure 2-9. Remove Protective Vinyl

Protective vinyl MUST be removed from the platter before use.

•Proceed to the Operational Verification instructions below.

Product Reference Guide 2-17