I 2 of 5 Minimum Label LengthThis feature specifies the minimum allowable length of an I 2 of 5 label.

 

Length in this case includes check and data characters, but does not

 

include start or stop characters. This feature applies when I 2 of 5

 

Length Control is set to variable-length decoding.

NOTE

Minimum label length should be less than or equal to maximum label

length.

 

To set this feature:

1. Scan the SWITCH bar code.

2. Scan the bar code, SET I 2 OF 5 MINIMUM LABEL LENGTH below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3. Scan the appropriate digits from the keypad in Appendix C that represent the desired minimum label length. The selectable range for this option is 02 to 50, even numbers only. Pad all single digit numbers with a leading zero to yield a two-digit entry (02-50).

4. Complete the programming sequence by scanning the SWITCH bar code.

SET I 2 OF 5 MINIMUM LABEL LENGTH

Product Reference Guide

6-221