Datalogic Scanning 8500 Code 128 Enable, To set this feature:, Scan the SWITCH bar code, 1.Scan the SWITCH bar code, Complete the programming sequence by scanning the SWITCH bar code

Code 128 Enable

Enables/disables the ability of the scanner to decode Code 128 labels.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

CODE 128 = DISABLE

CODE 128 = ENABLE

6-200 Magellan® 8500 Scanner