MSI/Plessey Length Control

This feature specifies whether variable-length or fixed-length decoding will be set for MSI/Plessey.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

 

If variable-length control was selected, you must now set the features

 

MSI/Plessey Maximum Label Length and MSI/Plessey Mini-

 

mum Label Length. If fixed-length control was selected, you must

NOTE

now set I 2 of 5 Fixed Length 1 and MSI/Plessey Fixed Length

2.

MSI/PLESSEY LENGTH CONTROL = VARIABLE-LENGTH

MSI/PLESSEY LENGTH CONTROL = FIXED-LENGTH

Product Reference Guide

6-255