Datalogic Scanning 8500 Good Read Beep Frequency, •Low = 660 Hz, •High = 1050 Hz, •Medium = 860 Hz, Scan the SWITCH bar code, 1.Scan the SWITCH bar code

Good Read Beep Frequency

Adjusts the scanner’s good read beep to sound at low, medium, or high frequency (controls the beeper’s pitch/tone).

•Low = 660 Hz•Medium = 860 Hz•High = 1050 HzTo set the Good Read Beep Frequency:

1.Scan the SWITCH bar code.

2.Scan your selection from the three bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

GOOD READ BEEP FREQUENCY = LOW

6-24 Magellan® 8500 Scanner