Codabar Length Control

This feature specifies whether variable-length or fixed-length decoding will be set for Codabar.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

 

If variable-length control was selected, you must now set the features

 

Codabar Maximum Label Length and Codabar Minimum

 

Label Length. If fixed-length control was selected, you must now set

NOTE

Codabar Fixed Length 1 and Codabar Fixed Length 2.

 

CODABAR LENGTH CONTROL = VARIABLE-LENGTH

CODABAR LENGTH CONTROL = FIXED-LENGTH

6-234

Magellan® 8500 Scanner