Code 128 Fixed Length 1

This feature specifies Code 128 first fixed length.

This applies when Code 128 Length Control is set to fixed-length decoding.

NOTE

To set this feature:

1.Scan the SWITCH bar code.

2.Scan the bar code, SET CODE 128 FIXED LENGTH 1 below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Scan the appropriate digits from the keypad in Appendix C that represent the desired fixed label length. The selectable range for this option is 01 to 80. Pad all single digit numbers with a leading zero to yield a two-digit entry (01-80).

4.Complete the programming sequence by scanning the SWITCH bar code.

SET CODE 128 FIXED LENGTH 1

6-208

Magellan® 8500 Scanner